COMPOSITION:
1 capsulefiller Full Metal 120 for DB Caps, 1 loader, 1 tamper, 1 powder stop, 1 brush, 1 powder spreader and 1 stylus.
───────────────────
COMPATIBLE CAPSULE SIZES:
A - AA - AAel - AAA
Capsules available at Feton.
───────────────────
INFORMATIONS:
- The capsule filler fills 120 capsules in one go.
- The best choice for production of up to 1200 capsules/hour
- One capsule size per machine
- Our capsule filler is easy to clean.
- Manufactured with aluminium cassette instead of plates.
- Fills capsule sizes A - AA - AAel - AAA
───────────────────
HOW TO USE:
Video demonstration with our capsulefiller FMT120
1. Prepare your equipment. Install the plates.
2. Load the capsules. Please refer to the charger data sheet for detailed instructions.
3. Pull the lever to lock the capsule bodies.
4. Pull the top plate upwards, starting from the back to facilitate separation. Push with your palms on the handles and pull with your fingers on the top plate.
5. Release the lever. If necessary, push on the capsule bodies.
6. Place the stainless steel filling plate on the machine before filling the capsules.
(Remove the stainless steel filling plate before replacing the top plate, Important).
7. Pull on the base plate to push the capsule bodies into the capsule heads. The capsules are now ‘pre-sealed’.
8. Take the top plate and turn it over on your table, close the capsules by hand.
9. Your capsules are now ready.
DIMENSIONS:
Length: 310 mm
width: 215 mm
height : 80 mm
Weight: 5,8 kg
───────────────────
TIPS:
Discover our
Full metal 120 for DB Caps.
Discover all our
capsule fillers.
───────────────────
HOW TO CLEAN:
It is important to clean the parts in contact with the capsules or the powder thoroughly between each use to avoid contamination. Washing can be done by hand, in a dishwasher or in an autoclave. If done by hand, use warm water and soap.
Use a maximum temperature of 110°C / 230°F for all the metallic parts.
Use a maximum temperature of 40°C / 104°F for all the plastic parts.
If you have difficulties washing the inside of holes on the plates, use the
Feton-cleaning brush.
───────────────────
ORDER NOW:
contact@feton.com order via our
contact form.
With a dynamic R&D department, we are ready to fulfill your special requests.