COMPOSITION OF THIS KIT:
1 Capsules Enteric Coating kit and 1 Datasheet.
Not included: The enteric solution and capsules
───────────────────
COMPATIBLE CAPSULE SIZES**:
4,3,2,1,0
Capsules available at Feton.
───────────────────
INFORMATIONS:
Note: For the magistral preparation of enteric-coated capsules it is best to use capsule size No.1 or No.2.
The solution used will generally be Cellulose Acetatephtalate
1. Fill the capsules in the usual way and close them.
2. Fill the Rubber Box with enteric solution (adjust the level depending on the size of capsules used). Check and adjust the solution level after each soak.
3-4. If you have a Feton Filler for Capsules size 0, 1 or 2, you can position the Capsules Holder on the Top plate and push the capsules into the Capsules Holder by lifting the Filler Base Plate. If not, fill the Capsules Holder by hand.
5. Soak the capsules in the solution, ensuring that they are immersed above the joint formed by the bottom and top of the capsule. Drain the capsules.
6. While keeping the capsules facing down, place the coating plate on the Coating Support and allow to dry for 10 minutes.
7. Repeat steps 5 to 6 once more to obtain two layers of coating.
8. Once dry, place the Capsules Holder on the Reversing Support and push them with the Reversing Plate, so that the half that is not yet covered with enteric solution is ejected.
9. Repeat steps 5 to 6 twice, to obtain two layers of coating.
10. The capsules are now gastro-resistant.
DIMENSIONS AND WEIGHT:
Dimensions1:
Length: 137mm
width: 215 mm
height: 64,5 mm
Dimensions2:
Length: 160mm
width: 90 mm
height: 32,3 mm
Weight:
1,8 kg
───────────────────
HOW TO CLEAN:
For easier cleaning, soak the parts in contact with the solution in warm water before the solution hardens.
If this does not work, soaks the parts in a solution containing 10% sodium bicarbonate and warm water.
───────────────────
ORDER NOW :
contact@feton.com order via our contact form.
With a dynamic R&D department, we are ready to fulfill your special requests.