COMPOSITION OF THIS KIT:
Coating plate, Two supports, Dish, Instruction manual, Pushing plate
Not included: The enteric solution and capsules
───────────────────
TWO SIZES AVAILABLE:
Capsules sizes** 000-00 or Capsules sizes 0-1-2-3-4
───────────────────
COMPATIBLE CAPSULE SIZES:
4,3,2,1,0,00,000
Capsules available at Feton.
───────────────────
INFORMATIONS:
This kit allows you to manually cover your capsule with an enteric solution, which makes them gastro-resistant.
───────────────────
HOW TO USE:
1. Fill the capsules in the usual way and close them.
2. Push the capsules into the holes in the coating plate, all in the same
direction.
3. Fill the rubber box with enteric solution (adjust the level depending on the
size of capsules used).
4. Soak the capsules in the solution, ensuring that they are immersed above
the joint formed by the bottom and top of the capsule. Drain the capsules.
5. While keeping the capsules facing down, place the coating plate on the
Support and allow to dry for 10 minutes.
6. Repeat steps 3 to 5 once more to obtain two layers of coating.
7. Once dry, place the Capsules with the provided support so that the half
that is not yet covered with enteric solution is ejected. You may also need to
push them a little further by hand depending on the capsule size.
8. Repeat steps 3 to 5 twice, to obtain two layers of coating.
9. The capsules are now gastro-resistant.
HOW TO CLEAN:
For easier cleaning, soak the parts in contact with the solution in warm water before the solution hardens.
If this does not work, soaks the parts in a solution containing 10% sodium bicarbonate and warm water.
───────────────────
TIPS:
Discover our range of accessories.
───────────────────
ORDER NOW :
contact@feton.com order via our contact form.
With a dynamic R&D department, we are ready to fulfill your special requests.